Electrical Rewiring and Remodeling in Arlington, TX
Tarrant Electric provides licensed electrical rewiring and remodeling services throughout Arlington, TX, with a 4.9-star Google rating and additional verified feedback on Yelp. Operating under TECL-31627, fully bonded and insured, and available 24 hours a day for emergency electrical service, our electricians handle the full scope of remodeling electrical work, from targeted rewiring in renovation zones to whole-home rewires on older properties, new circuit layouts for kitchen and bathroom remodels, and wiring for home additions. Whether you are opening walls for a planned remodel or discovering aging wiring during a renovation, we bring the project up to current code. Call us today to schedule your Arlington rewiring consultation.
I highly recommend Tarrant Electric & Air
What Is Electrical Rewiring and Remodeling and Why Arlington Homeowners Need It
Electrical rewiring and remodeling cover the planning and installation of new or replacement wiring in a home that is undergoing renovation, addition, or a comprehensive electrical update. Remodeling electrical work is distinct from repair work in that it typically involves opening walls and ceilings either intentionally as part of a broader renovation or specifically to access wiring that needs to be replaced or extended.
For Arlington homeowners, the city’s housing stock median of 1986 means a meaningful share of homes are approaching or past the 40-year mark, which is the period when comprehensive electrical review and selective rewiring become a practical consideration for homeowners undertaking substantial renovation projects. Homes in this age range were built before current code requirements for AFCI protection, tamper-resistant outlets, and updated grounding standards, meaning a remodel is often the right time to bring those areas into compliance.
Electrical Rewiring and Remodeling Services We Provide in Arlington
Kitchen and Bathroom Remodel Wiring
Kitchen and bathroom renovations require dedicated circuits for new appliances, updated GFCI protection throughout wet areas, and in many cases, new circuit layouts that support modern kitchen equipment. We wire these spaces to the current code as part of the broader remodel.
Home Addition Wiring
New square footage requires a complete circuit plan from the ground up. We design and install circuits for additions that support both current needs and reasonable future electrical demands, integrating with the existing panel where capacity allows.
Whole-Home Rewiring
For properties with widespread aging wiring, aluminum branch circuit wiring from the 1965-1973 era, or cloth-insulated wiring from earlier decades, a comprehensive whole-home rewire replaces the electrical system throughout the property with modern copper wiring meeting current code.
Aluminum Wiring Remediation
Homes in Arlington built between roughly 1965 and 1973 may contain aluminum branch circuit wiring associated with connection reliability concerns. We address this through proper remediation methods including approved connector types or selective replacement.
Basement and Attic Conversion Wiring
Converting an unfinished basement or attic space into livable square footage requires new circuits for lighting, outlets, and any HVAC equipment, all installed to current residential code requirements for habitable spaces.
Code Correction Wiring During Renovation
When renovation work opens walls and reveals non-compliant wiring from prior remodels or original construction, we correct the affected wiring to current code as part of the broader project scope.
Common Electrical Rewiring and Remodeling Issues in Arlington
Arlington homeowners request rewiring and remodeling electrical services for a range of situations tied to home renovation, aging infrastructure, and changing household needs.
- A kitchen or bathroom remodel is opening walls and the opportunity exists to update circuit layouts and meet current GFCI and AFCI requirements
- A home addition requires new circuits that the existing panel may or may not be able to support
- An older Arlington home shows signs of aluminum wiring, cloth-insulated wiring, or other older wiring types that warrant professional evaluation and remediation
- A previous DIY remodel left behind non-compliant wiring that a home inspection has flagged
- Foundation movement common to North Texas clay soil has stressed older wiring connections over the decades, and a renovation is the right time to correct them
- A converted garage, finished basement, or attic space needs new circuits and proper wiring for habitable use
Our Electrical Rewiring and Remodeling Process in Arlington
- We review your renovation plans and confirm which areas of the home the rewiring or remodeling electrical work needs to address.
- We assess the existing wiring in the renovation zone, identify any aging or non-compliant wiring that should be addressed as part of the project, and discuss the findings with you.
- We handle the permit application through Arlington Planning and Development Services before any rewiring or new wiring work begins.
- We complete the wiring work coordinated with your renovation timeline, roughing in circuits before walls close and completing connections and device installation as the remodel reaches the finish stage.
- We schedule the required inspections through the City of Arlington and ensure all work passes before closing the permit.
Why Arlington Homeowners Choose Tarrant Electric
See what neighbors are saying on our Google Business Profile, Yelp page, and Facebook.
| What We Offer | What It Means for You |
|---|---|
| Licensed Electrical Contractor (TECL-31627) | Work performed to Texas state licensing standards |
| Fully Bonded and Insured | Your property and our team are protected throughout every project |
| 24/7 Emergency Electrical Service | Help available any time an urgent electrical issue arises |
| 4.9-Star Google Rating | Consistent track record verified by real customers across DFW |
| 100 Percent Satisfaction Guarantee | We stand behind every job until you are fully satisfied |
| Clear Scope and Options Before Work Begins | You understand and approve the plan before any work starts |
| Coordinated With Your Renovation Timeline | We rough in and finish wiring at the right phases of your remodel, not on a separate schedule that disrupts the project |
Permits and Local Codes in Arlington
All rewiring and new wiring work in Arlington requires a permit through Arlington Planning and Development Services, located at 101 W Abram Street. This work must comply with the 2020 National Electrical Code as adopted with Arlington’s local amendments, and inspections are required at rough-in and final stages. Tarrant Electric handles the complete permit and inspection process as part of every rewiring and remodeling project.
Arlington, TX: Local Data and Service Context
Arlington’s housing stock median of 1986 means a large share of the city’s roughly 153,137 housing units were built during a period spanning several code cycles that predate today’s AFCI, tamper-resistant outlet, and grounding standards. Kitchen and bathroom remodels in these homes routinely involve bringing the affected circuits up to current code alongside the cosmetic renovation work.
North Texas’s heavy clay soil, common throughout the DFW area including Arlington, is known for expansion and contraction with moisture changes that cause gradual foundation movement in some older homes. Over decades, this movement can stress wiring connections at junction boxes in the affected areas of the house, a concern our electricians look for during rewiring inspections in established Arlington neighborhoods.
Homes in Arlington built between 1965 and 1973 may contain aluminum branch circuit wiring, which was common during that period due to a copper shortage. Aluminum wiring connections can loosen over time due to the metal’s thermal expansion and contraction properties. Our electricians identify and address aluminum wiring as part of rewiring and remodeling projects in this age range.
Areas Near Arlington We Also Serve
In addition to Arlington, TX, Tarrant Electric serves Fort Worth, Grand Prairie, Mansfield, and Burleson, along with many other communities throughout the greater Dallas-Fort Worth metro area.
Frequently Asked Questions: Electrical Rewiring and Remodeling in Arlington, TX
Do I need to rewire my Arlington home just because it is older?
Not necessarily. The need for rewiring depends on the specific wiring type, its condition, and whether ongoing renovations are creating access to the wiring. A professional inspection can confirm whether targeted remediation or selective rewiring is warranted versus a whole-home rewire.
How do I know if my Arlington home has aluminum wiring?
The wire insulation in aluminum-wired homes is typically labeled “AL” or “Aluminum.” Homes built between approximately 1965 and 1973 are the most likely candidates. An electrician can confirm during an inspection.
What happens to wiring behind walls during a kitchen or bathroom remodel?
When remodeling opens walls in kitchens and bathrooms, the newly accessible wiring must be brought into compliance with current code requirements for the renovated space, including GFCI protection in wet areas and AFCI protection on relevant circuits. This is a standard part of our remodeling electrical scope.
Does Arlington require a permit for rewiring?
Yes, rewiring and remodeling electrical work in Arlington requires a permit through Planning and Development Services, with rough-in and final inspections required. Tarrant Electric manages this process as part of every rewiring project.
How long does a whole-home rewire typically take in an Arlington home?
Whole-home rewire timelines depend on the size of the home and whether walls need to be opened. Most projects span several days to a couple of weeks, with timing varying based on accessibility and the extent of wall work involved.
Can rewiring be done without removing all the drywall?
In many cases, wiring can be routed through attic access and wall cavities without opening entire wall surfaces. Our electricians plan routes to minimize drywall disruption, though some access points are typically unavoidable for whole-home rewires.
Does clay soil in North Texas really affect wiring?
The expansion and contraction of clay soil with moisture changes can cause gradual foundation movement over decades, which in some older homes places additional stress on wiring connections in affected wall sections. This is a relevant consideration in Arlington’s established neighborhoods.
What new circuits does a kitchen remodel typically require?
Modern kitchen code requirements include dedicated circuits for the refrigerator, microwave, garbage disposal, and dishwasher, plus at least two small appliance circuits for counter outlets. GFCI protection is required on all counter receptacles within 6 feet of a sink.
What is AFCI protection and when is it required during a remodel?
Arc-Fault Circuit Interrupter protection detects dangerous arcing conditions in wiring and trips the circuit before a fire can start. The 2020 NEC as adopted in Arlington requires AFCI protection on most circuits in habitable spaces, so a remodel that adds or modifies circuits in these areas must include AFCI-rated breakers.
Can a home addition be wired from the existing panel?
In many cases, yes, if the existing panel has sufficient remaining capacity and available breaker slots. When the panel cannot support the addition’s load, a panel upgrade is needed as part of the project. We assess this before the addition wiring begins.
How is aluminum wiring remediation different from full replacement?
Full replacement removes aluminum branch circuit wiring and replaces it with copper throughout. Remediation using approved connectors, sometimes called AlumiConn or similar approved devices, creates safe copper-to-aluminum connections at each outlet and switch without replacing the entire wire run. Both approaches are acceptable under current code guidance.
Can Tarrant Electric coordinate with my general contractor during a remodel?
Yes, we regularly coordinate with general contractors on remodeling projects, completing rough-in wiring at the appropriate phase so the project timeline stays on track without waiting on electrical work.
What is rough-in wiring and when does it happen in a remodel?
Rough-in wiring is the installation of all circuit cables and boxes before walls are closed, leaving connections at both the panel and each device location for final hookup once the finishing work is done. It happens before drywall in most remodels.
Is a home rewired top to bottom or can specific areas be targeted?
Targeted rewiring in specific areas, such as a kitchen, bathrooms, or addition, is the most common approach. A whole-home rewire is warranted when widespread wiring concerns exist throughout the property or when the opportunity of a major renovation makes comprehensive rewiring practical.
What does a code correction mean in a remodeling context?
When renovation work opens walls and reveals non-compliant wiring from a prior remodel or original construction, the National Electrical Code requires that the newly accessible wiring in the renovation zone be brought up to current standards. We address these corrections as part of the project scope.
Can the rewiring for a finished basement include circuits for a home office?
Yes, basement conversion circuits can include dedicated home office circuits, general purpose circuits for outlets, lighting circuits, and any HVAC-related circuits for the finished space, all designed to current code.
Does Tarrant Electric work on both small kitchen remodels and large whole-home projects?
Yes, we handle the full range from targeted single-room remodeling electrical work to comprehensive whole-home rewires across all of Arlington and the surrounding DFW area.
What if the inspector finds a problem during the rewiring inspection?
Our electricians work to code from the start to minimize the chance of inspection corrections. If a correction is needed, we address it promptly and schedule the re-inspection to keep the project moving.
How does rewiring affect the time my home will be without power in certain areas?
We coordinate power interruptions to specific circuits rather than the whole home wherever possible, working section by section to minimize the amount of time any area of the home is without power.
Can rewiring be combined with a panel upgrade in the same project?
Yes, combining rewiring and panel upgrade work in the same project is common and efficient, since both require panel access and permitting and coordinating them together reduces overall project duration.
Does a whole-home rewire increase the value of my Arlington property?
Updated wiring is increasingly scrutinized during home inspections and insurance underwriting. A documented, permitted whole-home rewire removes a common concern for buyers and insurers and demonstrates that the electrical system reflects current standards.
What does it mean if an inspector says wiring “does not meet current code”?
This typically means wiring installed under a previous code edition lacks features now required, such as AFCI protection, GFCI at specific locations, or proper grounding. Code does not require existing installations to be upgraded unless renovation work is being performed on the affected circuit.
Can I use my home during a rewiring project?
In most cases, yes, though specific rooms or areas will have power interrupted during active work. We coordinate the sequence of work to minimize the impact on occupied areas of the home.
How do I get started with electrical rewiring in Arlington?
Call 817-428-4404 or schedule online. We’ll discuss your renovation plans, assess the existing wiring, and walk you through the permit and project process specific to your Arlington home.
Does Tarrant Electric provide rewiring for commercial remodels in Arlington?
Yes, we provide electrical rewiring and remodeling work for commercial properties throughout Arlington, applying the appropriate commercial code standards alongside the residential standards we work to daily.
Get Electrical Rewiring and Remodeling in Arlington Today