Whole House Lighting Upgrade in Irving, TX
Tarrant Electric provides comprehensive whole house lighting upgrades throughout Irving, TX, with a 4.9-star Google rating across more than 95 reviews and additional verified feedback on Yelp. Licensed under TECL-31627, fully bonded and insured, and available 24 hours a day for emergency electrical service, our electricians design and install complete home lighting solutions, from full LED conversion and recessed lighting additions to smart switch installation and outdoor lighting integration across every room and exterior area of Irving homes. Whether your Irving home has outdated incandescent fixtures, rooms with no ceiling lighting, or inadequate coverage for current furniture layouts, we approach the full property as a single coordinated project. Call us today to schedule your Irving whole house lighting consultation.
I highly recommend Tarrant Electric & Air
What Is Whole House Lighting Upgrade and Why Irving Homeowners Need It
A whole house lighting upgrade is a comprehensive evaluation and improvement of an entire property’s lighting system, addressing fixture type, fixture placement, circuit capacity, switch configuration, and often smart control integration across all rooms in a coordinated single project rather than room-by-room over years. This approach delivers consistent lighting performance throughout the home, efficient permit handling for any new circuits required, and better overall design coordination than piece-by-piece upgrades.
For Irving homeowners, the most common motivation for a whole house lighting project is a combination of aging incandescent or fluorescent fixtures throughout the home, inadequate ceiling light coverage in living rooms and bedrooms that were originally wired with switched outlets rather than ceiling fixtures, and the desire to modernize with LED efficiency and smart controls. Irving homes built in the 1970s through 1990s frequently have all three of these needs simultaneously, making the whole-house approach particularly efficient.
Whole House Lighting Upgrade Services We Provide in Irving
Whole-Home LED Conversion
A complete property-wide conversion from incandescent, halogen, or fluorescent to LED, including retrofitting existing housings where compatible and replacing full fixtures where the housing is incompatible or outdated.
Recessed Lighting Design and Installation
Adding recessed LED lighting to rooms that currently lack ceiling fixtures or that have only a single central fixture, including layout planning for even coverage, circuit additions, AFCI protection as required by the 2023 NEC, and dimmer switch installation.
Smart Lighting Control Installation
Installing smart switches, dimmers, and scene controls that allow voice, app, or scheduled control of lighting throughout the home, compatible with popular smart home platforms.
Decorative Fixture Upgrade and Installation
Replacing outdated or inefficient ceiling fixtures, chandeliers, and pendant lights throughout the home with modern LED-integrated or LED-compatible alternatives as part of a broader lighting redesign.
Under-Cabinet and Accent Lighting
Installing hardwired under-cabinet lighting in kitchens and accent lighting in living spaces as part of a whole-home project, providing layered illumination beyond ceiling-only coverage.
Exterior Lighting Integration
Extending the whole-home lighting project to include coordinated exterior lighting for the front entry, driveway, and outdoor living spaces, ensuring the property presents consistently from curb to interior.
Common Whole House Lighting Upgrade Issues in Irving
Irving homeowners undertaking whole house lighting upgrades are typically motivated by a combination of issues that have accumulated over years rather than a single immediate problem.
- Outdated incandescent fixtures throughout the home that are inefficient, generate excess heat during the DFW cooling season, and produce inconsistent light quality
- Living rooms and dining rooms wired with only a switched outlet rather than a ceiling fixture, requiring floor and table lamps as the primary light source
- Hallways, closets, and secondary rooms with no ceiling lighting at all
- A home renovation that has opened ceilings in some areas and created the efficient opportunity to upgrade throughout the property
- The desire for whole-home smart lighting controls as part of a broader home technology modernization
- Outdated exterior lighting that does not cover the driveway, entry, and outdoor living areas consistently
Our Process in Irving
- We walk through the entire property with you to assess existing lighting in every room and exterior area, and discuss your goals for brightness, coverage, color temperature, and smart control features.
- We develop a lighting plan covering all rooms and exterior areas, identifying which areas need new fixture locations, which use LED retrofit, and which need full fixture replacement.
- We handle the permit application for any new wiring or fixture locations through the City of Irving Inspections Department.
- We complete the project room by room, minimizing disruption by working systematically through the home.
- We test every fixture and control, confirm smart system pairing where applicable, and walk through the completed lighting system with you before finishing.
Why Irving Residents Choose Tarrant Electric
See what neighbors are saying on our Google Business Profile, Yelp page, and Facebook.
| What We Offer | What It Means for You |
|---|---|
| Licensed Electrical Contractor (TECL-31627) | Work performed to Texas state licensing standards |
| Fully Bonded and Insured | Your property and our team are protected on every project |
| 24/7 Emergency Electrical Service | Help available any time an urgent issue arises, day or night |
| 4.9-Star Google Rating, 95+ Reviews | A consistent track record verified by DFW area customers |
| 100 Percent Satisfaction Guarantee | We stand behind every job until you are fully satisfied |
| Clear Scope and Options Before Work Begins | You approve the plan before any work starts |
| Whole-Home Lighting Plan Before Any Installation Begins | A coordinated plan ensures consistent lighting performance across all rooms rather than a mismatched result from independent room-by-room work |
Permits and Local Codes in Irving
Whole house lighting upgrades that involve new fixture locations, new circuit wiring, or new switch circuits require a permit through the City of Irving Inspections Department, located at 825 W. Irving Blvd, Second Floor, Irving, TX 75060. Work must comply with the 2023 National Electrical Code, including AFCI requirements for new circuits in habitable spaces. Like-for-like fixture swaps within existing housings typically do not require a permit. Tarrant Electric determines what permitting applies to your project scope and handles the process when required.
Irving, TX: Local Data and Service Context
Irving homes built between the 1970s and 1990s were typically designed with ceiling lighting in bedrooms, kitchens, and bathrooms, but relied on switched outlet circuits rather than ceiling fixtures in living and dining rooms. This means many established Irving homes have rooms where the primary light source is a floor or table lamp on a switched outlet rather than a ceiling fixture, a layout that a whole-home upgrade can efficiently address by adding recessed lighting in previously uncovered rooms.
LED fixtures generate approximately 75 percent less heat than equivalent incandescent output. In Irving homes running central air conditioning almost continuously from June through September, converting all fixtures to LED across the property produces a measurable secondary reduction in cooling load, compounding the direct electricity savings from the LED conversion.
Areas Near Irving We Also Serve
In addition to Irving, TX, Tarrant Electric proudly serves Grand Prairie, Carrollton, and Coppell, along with many other communities throughout the greater Dallas-Fort Worth metro area.
Frequently Asked Questions: Whole House Lighting Upgrade in Irving, TX
What does a whole house lighting upgrade typically include?
A comprehensive project covers LED conversion of all existing fixtures, addition of new ceiling lighting in rooms that currently lack it, smart switch and dimmer installation, any required circuit additions with AFCI protection, and exterior lighting coordination, all planned as a single project.
How is a whole house upgrade different from an LED retrofit?
An LED retrofit targets specific existing fixtures for component replacement. A whole house upgrade is a comprehensive assessment and redesign of the entire property’s lighting, adding new fixtures where coverage is lacking and integrating controls alongside the LED conversion.
Do Irving homes commonly have rooms without ceiling light fixtures?
Yes. Irving homes built in the 1970s through 1990s frequently have living rooms, dining rooms, and master bedrooms wired with switched outlets rather than ceiling fixtures, meaning floor and table lamps are the primary light source in those rooms.
Does adding ceiling lighting to rooms that lack it require a permit in Irving?
Yes, adding new fixture locations requires new wiring, which requires a permit through the City of Irving Inspections Department. Tarrant Electric handles this as part of the whole-home project.
How many recessed lights does a typical Irving living room need?
Most Irving living rooms benefit from six to twelve recessed lights depending on square footage, ceiling height, and furniture layout. Our electricians plan the layout to provide even coverage without overly bright spots or dark corners.
What smart lighting platforms does Tarrant Electric install for in Irving?
We install smart switches and dimmers compatible with Google Home, Amazon Alexa, and Apple HomeKit. We confirm specific platform compatibility with your chosen devices during the project planning phase.
How long does a whole house lighting upgrade take in Irving?
Timeline varies by project scope. A full property upgrade for a typical Irving single-family home typically spans two to four days of installation work, with permit processing adding some scheduling time at the front end.
Can recessed lighting be added to rooms with vaulted ceilings in Irving homes?
Yes, vaulted ceilings require properly rated fixtures for the specific ceiling angle and insulation contact requirements. Our electricians plan for these requirements during the project assessment.
Does LED lighting reduce air conditioning costs in Irving?
LED fixtures produce approximately 75 percent less heat than incandescent equivalents. In Irving homes running AC heavily for several months each year, converting all fixtures to LED contributes to a real reduction in cooling load alongside the direct electricity savings.
Can smart switches be installed in older Irving homes from the 1970s and 1980s?
Smart switches require a neutral wire in the switch box. Many Irving homes built before the 1990s may not have a neutral wire at every switch location. Our electricians assess neutral wire availability during the project assessment and discuss options including switches designed to function without a neutral wire.
Is under-cabinet kitchen lighting included in a whole house project?
Under-cabinet lighting can be included as part of a whole-home project for kitchens that benefit from task lighting below upper cabinets. We install hardwired LED under-cabinet systems with compatible dimmers for a clean, permanent result.
Can a whole house lighting upgrade include outdoor lighting in Irving?
Yes, we extend whole-home lighting projects to include front entry, driveway, and outdoor living area lighting as part of a coordinated exterior upgrade that complements the interior work.
What AFCI requirements apply when adding new lighting circuits in Irving?
The 2023 NEC as adopted in Irving requires AFCI protection on new circuits in most habitable spaces including bedrooms, living rooms, and dining rooms. New lighting circuits in these areas must include AFCI-rated breakers as standard.
Can the whole house lighting upgrade be done in phases for an Irving home?
Yes, homeowners who prefer to spread the project over time can start with priority areas such as the kitchen and living room, then continue with additional rooms in subsequent phases as budget and timing allow.
Does whole house LED conversion increase Irving home value?
Modern, well-planned LED lighting throughout a home, particularly where recessed lighting has been added to rooms previously relying on floor lamps, is consistently noted by buyers and real estate agents as a desirable upgrade in Irving’s real estate market.
Can lighting be controlled by room or zone throughout an Irving home?
Yes, smart switches allow grouping fixtures into zones that can be controlled independently or together through scenes. This is particularly useful in Irving homes with open floor plans where a single switch currently controls both living and dining areas.
What is the difference between a dimmer switch and a smart dimmer?
A standard dimmer controls brightness manually at the switch location. A smart dimmer adds wireless control, allowing remote adjustment, scheduling, and scene integration through a smart home app or voice assistant.
Does Tarrant Electric provide guidance on fixture selection for a whole house upgrade?
Our electricians offer general guidance on fixture types, LED compatibility, and dimmer requirements during the assessment. Final fixture selection remains the homeowner’s decision, and we install chosen fixtures that meet the circuit and dimmer specifications for the project.
Will my Irving home be without power during a whole house lighting upgrade?
We work circuit by circuit, minimizing power interruptions to specific rooms rather than the whole home. Most occupied Irving homes remain largely functional throughout the project with power maintained to uninvolved areas.
Can Tarrant Electric do a whole house lighting upgrade for a Las Colinas townhome or condo?
Yes, we provide whole-home lighting upgrades for Las Colinas townhomes and condominiums as well as single-family homes throughout Irving, adapting the project scope for the specific property configuration.
What color temperature is best for whole house LED lighting in an Irving home?
A whole-home plan typically uses warmer temperatures (2700K to 3000K) in living and sleeping areas for a comfortable, inviting atmosphere, and slightly cooler temperatures (3000K to 4000K) in kitchens and bathrooms where clarity is the priority.
Can a whole house lighting upgrade be combined with other electrical work in Irving?
Yes, combining a lighting upgrade with panel evaluation, EV charger installation, or outlet upgrades into a single project is common and efficient, reducing the total permit and panel access visits required.
Does Tarrant Electric warrant its whole house lighting installation work in Irving?
Yes, all our installation work is backed by a 100 percent satisfaction guarantee on workmanship. LED fixtures and smart devices also carry manufacturer warranties, which we help document at the time of installation.
How do I schedule a whole house lighting consultation in Irving?
Call 817-428-4404 or schedule online and we will arrange a whole-property assessment at your Irving home. Our electricians will walk through every room, discuss your lighting goals, and develop a detailed plan for your upgrade.
Does Tarrant Electric provide whole house lighting upgrades for commercial Irving properties?
Yes, we provide comprehensive lighting upgrades for commercial properties including offices, retail spaces, and multitenant buildings throughout Irving, applying commercial code standards appropriate for the occupancy type.
Get Whole House Lighting Upgrade in Irving Today