Electrical Rewiring and Remodeling in Irving, TX
Tarrant Electric provides licensed electrical rewiring and remodeling services throughout Irving, TX, with a 4.9-star Google rating across more than 95 reviews and additional verified feedback on Yelp. Operating under TECL-31627, fully bonded and insured, and available 24 hours a day for emergency electrical service, our electricians handle the full scope of remodeling electrical work, from kitchen and bathroom circuit upgrades and new addition wiring to whole-home rewires and aluminum wiring remediation in Irving’s older established neighborhoods. Whether you are opening walls for a planned remodel in North Irving or discovering aging wiring during a Las Colinas renovation, we bring the project up to current code at every phase. Call us today to schedule your Irving rewiring consultation.
I highly recommend Tarrant Electric & Air
What Is Electrical Rewiring and Remodeling and Why Irving Homeowners Need It
Electrical rewiring and remodeling covers the planning and installation of new or replacement wiring in a home undergoing renovation, addition, or comprehensive electrical update. Remodeling electrical work differs from repair in that it typically involves opening walls and ceilings, either intentionally as part of a broader renovation or specifically to access wiring that needs to be replaced or extended.
For Irving homeowners, the city’s predominantly 1970s-1990s housing stock means that renovation projects frequently encounter wiring that predates current AFCI, GFCI, and tamper-resistant outlet requirements. A kitchen or bathroom remodel in an Irving home from 1982 will routinely reveal circuits that lack GFCI protection now required in those locations, making the renovation an efficient opportunity to bring those areas into current code compliance alongside the cosmetic work.
Electrical Rewiring and Remodeling Services We Provide in Irving
Kitchen and Bathroom Remodel Wiring
Kitchen remodels require dedicated circuits for major appliances, GFCI protection on all countertop receptacles, and updated circuit layouts when the kitchen floor plan changes. Bathroom renovations require GFCI protection and often circuit additions for new fixtures and ventilation equipment.
Home Addition Wiring
New square footage requires a complete circuit plan designed for the addition’s specific use, whether bedrooms, expanded kitchen space, or a new media room. We integrate addition circuits with the existing panel where capacity allows and handle panel upgrades when the addition’s load exceeds available capacity.
Whole-Home Rewiring
For Irving properties with widespread aging wiring, aluminum branch circuit wiring from the 1965-1973 era, or cloth-insulated wiring from earlier decades, a comprehensive whole-home rewire replaces all branch circuit wiring with modern copper conductors to current code.
Aluminum Wiring Remediation
Irving homes built between 1965 and 1973 may contain aluminum branch circuit wiring. We address this through approved remediation using connector methods that create safe copper-to-aluminum connections at every device location, or through selective replacement of affected circuit runs.
Garage and Attic Conversion Wiring
Converting garage or attic space into livable square footage requires new circuits for lighting, outlets, and any climate control equipment, all installed to current code requirements for the intended occupancy type.
Code Correction Wiring During Renovation
When renovation work opens walls and reveals non-compliant wiring from prior projects or original construction, we correct the newly accessible wiring to current code as part of the renovation electrical scope.
Common Electrical Rewiring and Remodeling Issues in Irving
Irving homeowners request rewiring and remodeling electrical services for reasons tied to renovation timing, aging infrastructure, and changing household needs.
- A kitchen or bathroom remodel is opening walls and the opportunity exists to update circuit layouts and meet current GFCI and AFCI requirements
- A home addition requires new circuits that the existing panel may or may not be able to support
- An older Irving home built between 1965 and 1973 has aluminum branch circuit wiring identified during a home inspection or insurance review
- A garage conversion to living space needs new circuits and updated wiring for the intended occupancy
- A prior DIY remodel left behind non-compliant wiring that a home inspection has flagged
- Ongoing foundation movement in North Texas clay soil has stressed older wiring connections over decades, and a renovation is the practical time to address them
Our Process in Irving
- We review your renovation plans and confirm which areas of the home the rewiring or remodeling electrical work needs to address.
- We assess existing wiring in the renovation zone, identify aging or non-compliant conditions that should be corrected, and discuss the findings with you before any work begins.
- We handle the permit application through the City of Irving Inspections Department before any wiring work begins.
- We complete the wiring work coordinated with your renovation timeline, roughing in circuits before walls close and completing device connections at the finish stage.
- We schedule required inspections through the City of Irving and ensure all work passes before closing the permit.
Why Irving Residents Choose Tarrant Electric
See what neighbors are saying on our Google Business Profile, Yelp page, and Facebook.
| What We Offer | What It Means for You |
|---|---|
| Licensed Electrical Contractor (TECL-31627) | Work performed to Texas state licensing standards |
| Fully Bonded and Insured | Your property and our team are protected on every project |
| 24/7 Emergency Electrical Service | Help available any time an urgent issue arises, day or night |
| 4.9-Star Google Rating, 95+ Reviews | A consistent track record verified by DFW area customers |
| 100 Percent Satisfaction Guarantee | We stand behind every job until you are fully satisfied |
| Clear Scope and Options Before Work Begins | You approve the plan before any work starts |
| Coordinated With Your Irving Renovation Timeline | We rough in and finish wiring at the right phases of your remodel, not on a separate schedule that disrupts the project |
Permits and Local Codes in Irving
All rewiring and new wiring work in Irving requires a permit through the City of Irving Inspections Department, located at 825 W. Irving Blvd, Second Floor, Irving, TX 75060. Work must comply with the 2023 National Electrical Code as adopted in Irving, and inspections are required at rough-in and final stages. Tarrant Electric manages the complete permit application and inspection scheduling process for every Irving rewiring and remodeling project.
Irving, TX: Local Data and Service Context
Irving’s housing stock from the 1970s through 1990s spans an era when wiring requirements changed substantially across multiple code cycles. Kitchens from the early 1980s typically have fewer dedicated appliance circuits than current code specifies, lack GFCI on countertop receptacles, and may have never had an AFCI breaker since that requirement came later. A kitchen remodel is a natural time to address all of these gaps in a single permitted project.
North Texas clay soil is a genuine long-term factor for Irving’s established neighborhoods. The expansion and contraction of clay with moisture changes causes gradual foundation movement in some homes, which over decades can stress wiring connections in affected wall sections. Our electricians assess for this concern during rewiring inspections in Irving’s older neighborhoods, particularly in North Irving and University Hills where foundation movement is more commonly documented.
Areas Near Irving We Also Serve
In addition to Irving, TX, Tarrant Electric proudly serves Grand Prairie, Carrollton, and Coppell, along with many other communities throughout the greater Dallas-Fort Worth metro area.
Frequently Asked Questions: Electrical Rewiring and Remodeling in Irving, TX
Do I need to rewire my Irving home just because it is older?
Not necessarily. The need for rewiring depends on the specific wiring type, its condition, and whether ongoing renovations are creating access to the wiring. A professional inspection can confirm whether targeted remediation or a more comprehensive rewire is warranted.
What happens to wiring behind walls during a kitchen or bathroom remodel?
When renovation opens walls in kitchens and bathrooms, the newly accessible wiring must be brought into compliance with current code for the renovated space, including GFCI protection in wet areas and AFCI protection on relevant circuits. This is standard scope for our remodeling electrical work.
Does Irving require a permit for rewiring?
Yes, rewiring and new wiring work in Irving requires a permit through the City of Irving Inspections Department, with rough-in and final inspections required. Tarrant Electric manages this process as part of every rewiring project.
Can Tarrant Electric phase a whole-home rewire around an Irving homeowner’s schedule?
Yes, we can sequence a whole-home rewire to accommodate an occupied home, working area by area and maintaining power to uninvolved rooms throughout the project. We discuss the phasing and expected power interruption periods with the homeowner before work begins.
Can rewiring be done without removing all the drywall?
In many cases, wiring can be routed through attic space and wall cavities with limited drywall disruption. Some access points are typically unavoidable for a whole-home rewire, but our electricians plan routes to minimize the number and size of openings.
Is aluminum wiring remediation required before selling an Irving home?
Aluminum wiring is not automatically required to be remediated before a home sale in Texas. However, home inspectors and buyers will often flag it, and insurance carriers may require documentation of remediation or panel-level protection before issuing or renewing coverage. Proactively addressing it simplifies the transaction.
What is the difference between aluminum wiring remediation and full replacement?
Remediation uses approved connectors to create safe copper-to-aluminum connections at every outlet and switch without replacing the wire runs themselves. Full replacement removes the aluminum and installs copper throughout. Both approaches are acceptable under current code guidance from the CPSC.
What new circuits does a kitchen remodel typically require in an Irving home?
Current code requirements include dedicated circuits for the refrigerator, microwave, garbage disposal, and dishwasher, plus at least two small appliance circuits for countertop outlets. All countertop outlets require GFCI protection.
What is AFCI protection and when is it required in an Irving remodel?
Arc-fault circuit interrupter protection detects dangerous arcing in wiring that can cause fires without triggering a standard breaker. The 2023 NEC as adopted in Irving requires AFCI protection on circuits in habitable spaces, so a remodel that adds or modifies circuits in these areas must include AFCI breakers.
Can a home addition be wired from the existing panel in Irving?
In many cases, yes, if the existing panel has sufficient remaining capacity and available breaker slots. When the panel cannot support the addition’s load, a panel upgrade is needed as part of the project. We assess this before addition wiring begins.
Can Tarrant Electric coordinate with my general contractor during an Irving remodel?
Yes, we regularly coordinate with general contractors on remodeling projects in Irving, completing rough-in wiring at the appropriate phase so the project timeline stays on track without waiting on electrical work.
What is rough-in wiring and when does it happen in a remodel?
Rough-in wiring is the installation of all circuit cables and boxes before walls are closed, leaving connections at both the panel and each device location for final hookup once finishing work is done. It happens before drywall in most remodels.
Does Irving’s clay soil really affect electrical wiring over time?
The expansion and contraction of North Texas clay soil with moisture changes causes gradual foundation movement in some Irving homes over decades, which can stress wiring connections in affected wall sections. This is a relevant consideration when rewiring inspections cover connections in walls of older established Irving neighborhoods.
Can rewiring be combined with a panel upgrade in the same Irving project?
Yes, combining rewiring and panel upgrade work in the same project is common and efficient. Both require panel access and permitting, and coordinating them together reduces total project duration.
What code corrections are commonly needed during Irving home renovations?
Common corrections in Irving renovation projects include adding GFCI protection in kitchens and bathrooms where it was absent, correcting non-code wiring methods from prior DIY or unpermitted work, updating aluminum wiring connections, and adding AFCI protection on circuits that lacked it.
Can a garage-to-living-space conversion be wired in Irving?
Yes, garage conversions require new circuits for lighting, outlets, and any HVAC equipment appropriate for habitable occupancy. We handle the complete electrical scope including permitting through the City of Irving for these projects.
Does Tarrant Electric work on both small kitchen remodels and large whole-home projects in Irving?
Yes, we handle the full range from targeted single-room remodeling electrical work to comprehensive whole-home rewires across all of Irving and the surrounding DFW area.
What happens if the inspector finds a problem during a rewiring inspection in Irving?
Our electricians work to code from the start to minimize inspection corrections. If a correction is requested, we address it promptly and schedule the re-inspection to keep the project on track.
Can Tarrant Electric handle rewiring for an Irving home being prepared for sale?
Yes, addressing wiring concerns before listing is a practical approach that removes inspection negotiation points. We can prioritize corrections identified during a pre-listing inspection and complete the permitted work in time for the listing.
Does rewiring increase the value of an older Irving home?
Updated wiring is increasingly noted during home inspections and insurance underwriting. A documented, permitted rewire removes a common concern for buyers and insurers and demonstrates the property’s electrical system reflects current standards.
Is a home occupied during a rewiring project in Irving?
In most cases, yes. We work circuit by circuit and coordinate power interruptions to minimize impact on occupied areas, maintaining power to uninvolved rooms throughout the project.
Can Tarrant Electric handle electrical rewiring for Irving commercial properties?
Yes, we provide electrical rewiring and remodeling work for commercial properties throughout Irving, applying appropriate commercial code standards alongside the residential standards we work to daily.
How do I get started with electrical rewiring in Irving?
Call 817-428-4404 or schedule online. We’ll discuss your renovation plans or rewiring concerns, assess the existing wiring, and walk you through the permit and project process specific to your Irving property.
Does rewiring cover outlets and switches or only wire runs?
A rewiring project replaces the wire runs and typically also includes new outlets, switches, and other devices in the rewired areas, since the devices are the connection points for the new wiring and are most efficiently replaced as part of the same scope.
Does Tarrant Electric provide rewiring for Irving rentals and investment properties?
Yes, we work with Irving property investors and landlords on rewiring projects to bring rental properties into current code compliance, documenting the work through the permit process for insurance and future transaction purposes.
Get Electrical Rewiring and Remodeling in Irving Today