LED Lighting and Retrofitting in Irving, TX
Tarrant Electric provides professional LED lighting installation and retrofit services throughout Irving, TX, with a 4.9-star Google rating across more than 95 reviews and additional verified feedback on Yelp. Operating under TECL-31627, fully bonded and insured, and available 24 hours a day for emergency electrical service, our electricians handle everything from individual recessed can conversions in Irving homes to full fluorescent-to-LED retrofits in Las Colinas office buildings and commercial facilities. Whether you are converting outdated incandescent lighting in a 1990s home or upgrading the lighting in a large commercial facility to reduce operating costs, we complete every LED project correctly. Call us today to schedule your Irving LED lighting assessment.
I highly recommend Tarrant Electric & Air
What Is LED Lighting and Retrofitting and Why Irving Homeowners Need It
LED lighting retrofitting replaces the lamp, driver, or complete fixture of an existing light with a modern LED component that uses significantly less energy and lasts substantially longer than incandescent or fluorescent alternatives. In many retrofit applications, the existing fixture housing remains in place and only the internal components change, minimizing ceiling disruption and keeping the project cost-effective.
For Irving homeowners and businesses, LED retrofitting provides two compounding benefits that are particularly relevant in the DFW market. First, LED fixtures generate a fraction of the heat of incandescent bulbs, which reduces cooling load during Irving’s sustained summer season when air conditioning runs for months at a time. Second, the long service life of quality LED components, typically 15,000 to 50,000 hours, reduces replacement frequency in hard-to-reach fixtures, a meaningful practical benefit for commercial facilities with high-ceiling installations.
LED Lighting and Retrofitting Services We Provide in Irving
Recessed Can Light LED Retrofitting
The most common retrofit request in Irving homes from the 1980s through 2000s, we install LED retrofit modules that snap into existing recessed housing without ceiling modification, converting incandescent or halogen can lights to efficient LED output.
Full LED Fixture Replacement
When existing fixture housings are incompatible with retrofit kits or have reached end of life, we remove the old fixture entirely and install a new LED-integrated unit, the preferred approach for aging fluorescent fixtures and failed incandescent housings.
Commercial Fluorescent-to-LED Conversion
Las Colinas offices and Irving commercial facilities with overhead fluorescent tube systems benefit from conversion to LED panel fixtures or LED linear replacements, which deliver more consistent output and substantially lower operating costs over the life of the installation.
Recessed Lighting Addition
For Irving rooms without ceiling light coverage or with only a single central fixture, we design and install new LED recessed lighting layouts, including any required circuit wiring, AFCI protection, and dimmer switch installation.
Smart and Dimmable LED Installation
For homeowners wanting voice or app control of lighting, we install LED-compatible smart switches and dimmers and confirm proper pairing with existing smart home systems before completing the installation.
Under-Cabinet and Accent LED Lighting
Hardwired under-cabinet LED lighting in kitchens and accent lighting in living spaces provides layered illumination beyond ceiling-only coverage and is installed with appropriate dimming and switching as part of the project scope.
Common LED Lighting and Retrofitting Issues in Irving
Irving homeowners and businesses request LED lighting services for a range of reasons tied to the age of the housing and commercial stock, lighting efficiency goals, and specific fixture performance problems.
- Existing recessed can lights with incandescent bulbs in homes from the 1990s that are inefficient and generate excess heat during the long DFW cooling season
- LED bulbs that flicker or buzz after installation due to incompatible incandescent-rated dimmer switches
- Fluorescent tube lighting in commercial Irving properties that has reached end of life and needs modern replacement
- Rooms with inadequate ceiling light coverage where existing fixtures cannot meet the room’s lighting needs
- Smart lighting goals that require verifying neutral wire availability and dimmer compatibility before installation
- High-ceiling fixtures in two-story Irving homes that need LED conversion to reduce the frequency of difficult access replacements
Our Process in Irving
- We assess your existing fixtures, confirm housing compatibility for retrofit options, and discuss your preferences for brightness, color temperature, and any dimming or smart control features.
- We identify any dimmer switches that need replacement for LED compatibility and include this in the project scope.
- We install the LED components, confirm AFCI compliance on any new circuits, and install LED-rated dimmer switches where applicable.
- We test every fixture, confirm dimmer range and performance, and walk through the completed installation before finishing the job.
Why Irving Residents Choose Tarrant Electric
See what neighbors are saying on our Google Business Profile, Yelp page, and Facebook.
| What We Offer | What It Means for You |
|---|---|
| Licensed Electrical Contractor (TECL-31627) | Work performed to Texas state licensing standards |
| Fully Bonded and Insured | Your property and our team are protected on every project |
| 24/7 Emergency Electrical Service | Help available any time an urgent issue arises, day or night |
| 4.9-Star Google Rating, 95+ Reviews | A consistent track record verified by DFW area customers |
| 100 Percent Satisfaction Guarantee | We stand behind every job until you are fully satisfied |
| Clear Scope and Options Before Work Begins | You approve the plan before any work starts |
| LED Dimmer Compatibility Verified on Every Installation | We prevent the flickering and buzzing common with mismatched dimmer-LED combinations by confirming compatibility before installation, not after |
Permits and Local Codes in Irving
Like-for-like LED retrofit within existing fixture housings typically does not require a permit in Irving. Projects involving new fixture locations, new circuit wiring, or new switch circuits require a permit through the City of Irving Inspections Department, located at 825 W. Irving Blvd, Second Floor, Irving, TX 75060, and must comply with the 2023 National Electrical Code, including AFCI requirements for new circuits in habitable spaces. Tarrant Electric handles permit requirements when they apply to your specific project scope.
Irving, TX: Local Data and Service Context
Irving’s commercial concentration in Las Colinas, home to major corporate campuses including ExxonMobil, Nokia, Kimberly-Clark, and Fluor Corporation, creates significant demand for commercial LED retrofitting where high-bay or fluorescent overhead systems are being converted. The energy savings in large office or warehouse footprints with extensive overhead lighting can be substantial on a monthly operating basis.
For residential Irving properties, most homes built between the 1970s and late 1990s carry incandescent recessed lighting that is now 25 to 50 years old. The combination of age-related fixture reliability decline and the availability of high-quality, compatible LED retrofit modules makes this one of the most straightforward and cost-effective improvements available to Irving homeowners.
Areas Near Irving We Also Serve
In addition to Irving, TX, Tarrant Electric proudly serves Grand Prairie, Carrollton, and Coppell, along with many other communities throughout the greater Dallas-Fort Worth metro area.
Frequently Asked Questions: LED Lighting and Retrofitting in Irving, TX
What is LED retrofitting versus full fixture replacement?
LED retrofitting replaces only the lamp and internal components within an existing fixture housing. Full replacement removes the entire fixture and installs a new LED-integrated unit. Retrofitting is more cost-effective when the housing is structurally sound and compatible with available retrofit kit dimensions.
Will my existing dimmer switch work with LED bulbs?
Most older dimmer switches were designed for incandescent loads and cause flickering, buzzing, or reduced dimming range with LED bulbs. We verify dimmer compatibility during installation and replace incompatible dimmers with LED-rated models when needed.
What color temperature should I choose for LED lighting in my Irving home?
Warm white (2700K to 3000K) is most commonly chosen for living rooms and bedrooms, providing light similar to traditional incandescent sources. Cooler temperatures (3500K to 4000K) provide cleaner, brighter light suited to kitchens, bathrooms, and workspaces.
Does LED lighting make a difference for air conditioning costs in Irving?
LED fixtures generate approximately 75 percent less heat than equivalent incandescent output. During Irving’s extended cooling season, when air conditioning runs almost continuously from June through September, reduced fixture heat output contributes to lower AC energy draw alongside the direct LED electricity savings.
Does LED retrofitting require a permit in Irving?
Like-for-like retrofit in existing housings typically does not require a permit. New fixture locations and new circuit wiring require a permit through the City of Irving Inspections Department. We determine permit requirements during your assessment.
Can LED bulbs be installed in any existing fixture housing?
Not always. Some older recessed housings require a retrofit kit specifically sized for that housing type and diameter. Our electricians assess housing compatibility before committing to a retrofit approach and recommend full fixture replacement when the housing is not suitable for available retrofit options.
Can LED retrofitting be done in commercial high-bay fixtures in Las Colinas?
Yes, commercial high-bay LED retrofitting is a common project for Las Colinas office facilities and other commercial properties in Irving with high-intensity fluorescent or HID lighting that operates for many hours daily.
What is a smart LED switch and what does it require to install in Irving?
Smart LED switches allow voice or app control of connected fixtures and require neutral wire access in the switch box. Many Irving homes built before the 1990s may not have a neutral wire at switch locations. Our electricians confirm neutral wire availability before recommending smart switches.
How long do LED retrofit components last?
Quality LED retrofit modules are rated for 15,000 to 50,000 hours of operation. At typical residential usage rates, this corresponds to decades of service before replacement is needed, substantially reducing lamp replacement frequency compared to incandescent or compact fluorescent alternatives.
Can under-cabinet lighting be retrofitted to LED in an Irving kitchen?
Yes, hardwired under-cabinet LED strip or puck lighting is a common kitchen upgrade in Irving homes. We install hardwired systems with compatible dimmers for a clean, permanent installation that does not rely on plug-in strips.
Why do my LED lights flicker even after the dimmer was replaced?
Persistent flickering after dimmer replacement can indicate a loose circuit wiring connection, a failing fixture housing creating an intermittent electrical path, or a load compatibility issue that requires professional diagnosis rather than another component swap.
Can recessed LED lighting be added to rooms without existing ceiling fixtures in Irving?
Yes, adding recessed LED lighting to rooms without existing ceiling outlets requires new wiring and in most cases a new circuit, which needs a permit through the City of Irving. We design and install new lighting layouts including all circuit and switch work.
What AFCI requirements apply to new LED circuit installations in Irving?
The 2023 NEC as adopted in Irving requires AFCI protection on new circuits in most habitable residential spaces. New LED lighting circuits added in bedrooms, living rooms, and dining areas must include AFCI-rated breakers.
Can Tarrant Electric handle a full-home LED retrofit in Irving in a single visit?
For homes where straightforward like-for-like retrofits are needed throughout, a single extended visit is often sufficient. Larger projects involving new fixture locations, circuit additions, or dimmer replacements throughout the home may benefit from scheduling across two days.
Does LED lighting increase the perceived brightness in a room?
LED lamps calibrated to the same lumen output as incandescent lamps produce the same brightness. Many homeowners choose LED options with higher lumen output than their prior incandescent bulbs, which increases perceived brightness in the space. Our electricians help identify appropriate lumen levels for each room.
Is commercial fluorescent-to-LED conversion worth it for Irving businesses?
Commercial facilities with overhead fluorescent lighting running for many hours daily typically see meaningful reductions in lighting-related electricity draw from LED conversion, with the reduced lamp replacement frequency providing an additional maintenance cost benefit.
Can Tarrant Electric retrofit exit and emergency lighting to LED in Irving commercial properties?
Yes, exit signs and emergency lighting fixtures can be retrofitted or replaced with LED-based alternatives that meet life-safety code requirements. These installations involve specific code standards for maintained illumination duration and placement.
What is the difference between an LED retrofit kit and a new LED fixture?
An LED retrofit kit replaces the internal components of an existing housing while leaving the housing in place. A new LED fixture includes both the housing and the LED components as a single integrated unit. New fixtures provide a completely fresh installation but require a slightly larger project scope.
Does Tarrant Electric install LED lighting for Irving apartment or multifamily properties?
Yes, we provide LED lighting retrofitting for multifamily properties throughout Irving, working with property managers to coordinate unit access and minimize disruption to tenants during the project.
How do I schedule LED lighting service in Irving?
Call 817-428-4404 or schedule online. Let us know the type and approximate count of fixtures involved and whether you are interested in dimming or smart controls, and we will arrange a consultation at your Irving property.
Can LED lighting help with a home sale in Irving?
Modern, energy-efficient LED lighting throughout a home, particularly where recessed lighting has been added to rooms that previously lacked it, is noted by buyers and real estate agents as a desirable feature that can positively influence buyer perception.
Does Tarrant Electric install outdoor LED lighting in Irving?
Yes, our outdoor lighting installation scope includes LED exterior fixtures for driveways, entries, patios, and landscape areas, using weatherproof fixtures and wiring methods appropriate for outdoor installation in Irving’s climate.
What should I do if an LED retrofit is still flickering after the dimmer was replaced?
Persistent flickering after a dimmer swap indicates the issue lies elsewhere, potentially in a loose circuit connection, a failing housing, or a load compatibility problem. Our electricians can trace the specific cause and recommend the correct fix.
How does Irving’s summer heat affect enclosed LED fixtures?
LED components generate less heat than incandescent alternatives but still require adequate thermal management. Fully enclosed fixture housings in attic-adjacent spaces can reach temperatures that affect LED driver performance during Irving’s summer months. We recommend fixtures with rated operating temperatures appropriate for enclosed high-temperature applications.
Can Tarrant Electric do a phased LED retrofit for an Irving commercial property?
Yes, we can phase commercial LED retrofitting to align with building occupancy constraints, budget planning, or operational priorities, retrofitting areas of the facility in planned stages rather than requiring a single project closeout of the entire space.
Get LED Lighting and Retrofitting in Irving Today